With the new PSL implementation, benchmarks do not show benefit
from caching the domain extracted from a hostname for later
reuse -- the caching seems to even add an overhead instead with
the new publicSuffixList implementation.
Default behavior is to fall back to an alternative backend
if the uBO-selected one is not available. However there will be
no fall back when the `cacheStorageAPI` is set to one specific
backend by the user.
The value of `suspendTabsUntilReady` was disregarded in Firefox and
uBO defaulted to always defer tab loading until it was ready.
This commit allows to disable the deferring of tab loading in
Firefox. The new valid values for `suspendTabsUntilReady` are:
- `unset`: leave it to the platform to pick the optimal
behavior (default)
- `no`: do no suspend tab loading at launch time
- `yes`: suspend tab loading at launch time
Related issue:
- https://github.com/uBlockOrigin/uBlock-issues/issues/409
By default `indexedDB` is used in Firefox for purpose of cache storage
backend.
This commit allows to force the use of `browser.storage.local` instead
as cache storage backend. For this to happen, set `cacheStorageAPI` to
`browser.storage.local` in advanced settings.
Additionally, should `indexedDB` not be available for whatever reason,
uBO will automatically fallback to `browser.storage.local`.
These filters are to be considered obsolete since they can't be
matched against network requests in the webRequest API.
They were probably meant to work when ABP was pre-webext, which
means they are quite probably obsolete and there is no longer
a point for uBO to conveniently translate them into CSP directives.
This removes the derivation of FilterOrigin flavors from
FilterOrigin itself and simplify code paths. FilterOrigin
flavors are small specialized classes, no need to
overcomplicate with derivation.
Specifically, this removes an indirect call to reach the
match() method.
As seen at:
https://whotracks.me/blog/adblockers_performance_study.html
The requests.json.gz file can be downloaded from:
https://cdn.cliqz.com/adblocking/requests_top500.json.gz
Copy the file into ./tmp/requests.json.gz
If the file is present when you build uBO using `make-[target].sh` from
the shell, the resulting package will contain `./assets/requests.json`,
which will be looked-up by the method below to launch a benchmark
session.
From uBO's dev console, launch the benchmark:
µBlock.staticNetFilteringEngine.benchmark();
The usual browser dev tools can be used to obtain useful profiling
data, i.e. start the profiler, call the benchmark method from the
console, then stop the profiler when it completes.
Keep in mind that the measurements at the blog post above where obtained
with ONLY EasyList. The CPU reportedly used was:
https://www.cpubenchmark.net/cpu.php?cpu=Intel+Core+i7-6600U+%40+2.60GHz&id=2608
Rename ./tmp/requests.json.gz to something else if you no longer want
./assets/requests.json in the build.
The motivation is to address the higher peak memory usage at launch
time with 3rd-gen HNTrie when a selfie was present.
The selfie generation prior to this change was to collect all
filtering data into a single data structure, and then to serialize
that whole structure at once into storage (using JSON.stringify).
However, HNTrie serialization requires that a large UintArray32 be
converted into a plain JS array, which itslef would be indirectly
converted into a JSON string. This was the main reason why peak
memory usage would be higher at launch from selfie, since the JSON
string would need to be wholly unserialized into JS objects, which
themselves would need to be converted into more specialized data
structures (like that Uint32Array one).
The solution to lower peak memory usage at launch is to refactor
selfie generation to allow a more piecemeal approach: each filtering
component is given the ability to serialize itself rather than to be
forced to be embedded in the master selfie. With this approach, the
HNTrie buffer can now serialize to its own storage by converting the
buffer data directly into a string which can be directly sent to
storage. This avoiding expensive intermediate steps such as
converting into a JS array and then to a JSON string.
As part of the refactoring, there was also opportunistic code
upgrade to ES6 and Promise (eventually all of uBO's code will be
proper ES6).
Additionally, the polyfill to bring getBytesInUse() to Firefox has
been revisited to replace the rather expensive previous
implementation with an implementation with virtually no overhead.
The Promise chain was not properly designed for WASM module
loading. This became apparent when removing WASM modules
from Opera build[1].
The problem was that errors thrown by fetch() -- used to
load WASM modules -- were not properly handled.
[1] Opera refuses updating uBO if there are unrecognized file
types in the package, and `.wasm`/`.wat` files are not
recognized by Opera uploader.
Related issue:
- https://github.com/NanoAdblocker/NanoCore/issues/239
The erroneous behavior was to compute the URL of a sublist as
relative to the URL of the root list, which may differ from the
URL of a parent list.
Those spurious disconnections have been observed to occur at
uBO's launch time.
Related issue:
- https://github.com/uBlockOrigin/uBlock-issues/issues/403
I have observed that this fixes an issue observed on Firefox 64
(current stable).
The reported Waterfox issue *may* be fixed as a result. If not,
the issue he still considered fixed as Waterfox is not
officially supported.
Related issue:
- https://github.com/uBlockOrigin/uBlock-issues/issues/399
The advanced setting `cacheStorageAPI` has been added to allow
a user to force the use of IndexedDB as cache storage. Set to
`IndexedDB` to force use of IndexedDB. Default to `unset`.
Performance-related work: the logger data has been decoupled
from the DOM -- inspired from CodeMirror's way of efficiently
handling large amout of text data.
This decoupling now makes the logger highly efficient CPU- and
memory-wise, and open the way to more possibilities.
Ability to configure some aspect of the logger behavior and
visuals:
- The hard-coded limit of 5000 entries has been
removed and is now replaced with a variety of
user-configurable settings to enforce the discarding of
logger entries.
- Some columns in the logger output can now be hidden.
The filter list look-up feature has been merged into the
existing overlay dialog used to create URL rules or static
filters, as an entry in a new "Details" pane.
Other issues addressed during refactoring:
- https://github.com/uBlockOrigin/uBlock-issues/issues/280
- https://github.com/gorhill/uBlock/issues/1999
The minimum version supported on Firefox has been bumped
up to 55.0.
Related issues:
- https://github.com/uBlockOrigin/uBlock-issues/issues/372
- https://github.com/gorhill/uBlock/issues/93
A new advanced settings has been added: `autoCommentFilterTemplate`.
Default value is `{{date}} {{origin}}`.
Placeholders are identified by `{{...}}`. There are currently
only three placeholders supported:
- `{{date}}`: will be replaced with current date
- `{{time}}`: will be replaced with current time
- `{{origin}}`: will be replaced with site information on which
the filter(s) was created
If no placeholder is found in `autoCommentFilterTemplate`, this
will disable auto-commenting. So one can use `-` to disable
auto-commenting.
Additionally, if auto-commenting is enabled, uBO will not emit a
comment if an emitted comment would be a duplicate of the last
one found in the user filter list.
The DOM surveyor will now use time-based logic to spread its work
over time. This allows the surveying to better scale down on
slower devices.
Additionally, the DOM surveyor code has been reworked to lower as
much as possible memory churning when collating nodes to survey.
This rework has been motivated after profiling the "monstrous DOM"
seen in the following page:
<https://doc.rust-lang.org/std/iter/trait.Iterator.html>
The idea is that making the DOM surveyor efficient on such
"monstrous DOM" case should make it efficient everywhere in
practice.
- Avoid concatenating with empty array: though the concatenated
array is empty, this still forces the creation of a whole new
array as per semantic of Array.prototype.concat().
<https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Array/concat>
- Do not convert arrays to strings when sending data to
main process in surveyPhase1(): I no longer see any benefit
doing so in profiling data (if I recall properly this was
benefiting Firefox, but I can't remember for sure anymore why
I chose to do so back then).
Related issue:
- https://github.com/gorhill/uBlock/issues/3683
This commit further increases uBO's procedural cosmetic filters
Adguard's cosmetic filter syntax -- specifically those procedural
cosmetic filters where plain CSS selectors appeared following
a procedural oeprator (this was rejected as invalid by uBO).
Also, experimental support for `:watch-attrs` procedural
operator, as discussed in <https://github.com/uBlockOrigin/uBlock-issues/issues/341#issuecomment-449765525>.
Support may be dropped before next release depending on whether
a better solution is suggested.
Additionally, the usual opportunistic refactoring toward ES6
syntax.
Related issue:
- https://github.com/gorhill/uBlock/issues/3708
This was brought into the issue above but I ended up forgotting
about it after I focused mostly on the second issue brought up
in there.
commit 7c6cacc59b27660fabacb55d668ef099b222a9e6
Author: Raymond Hill <rhill@raymondhill.net>
Date: Sat Nov 3 08:52:51 2018 -0300
code review: finalize support for wasm-based hntrie
commit 8596ed80e3bdac2c36e3c860b51e7189f6bc8487
Merge: cbe1f2e 000eb82
Author: Raymond Hill <rhill@raymondhill.net>
Date: Sat Nov 3 08:41:40 2018 -0300
Merge branch 'master' of github.com:gorhill/uBlock into trie-wasm
commit cbe1f2e2f38484d42af3204ec7f1b5decd30f99e
Merge: 270fc7f dbb7e80
Author: Raymond Hill <rhill@raymondhill.net>
Date: Fri Nov 2 17:43:20 2018 -0300
Merge branch 'master' of github.com:gorhill/uBlock into trie-wasm
commit 270fc7f9b3b73d79e6355522c1a42ce782fe7e5c
Merge: d2a89cf d693d4f
Author: Raymond Hill <rhill@raymondhill.net>
Date: Fri Nov 2 16:21:08 2018 -0300
Merge branch 'master' of github.com:gorhill/uBlock into trie-wasm
commit d2a89cf28f0816ffd4617c2c7b4ccfcdcc30e1b4
Merge: d7afc78 649f82f
Author: Raymond Hill <rhill@raymondhill.net>
Date: Fri Nov 2 14:54:58 2018 -0300
Merge branch 'master' of github.com:gorhill/uBlock into trie-wasm
commit d7afc78b5f5675d7d34c5a1d0ec3099a77caef49
Author: Raymond Hill <rhill@raymondhill.net>
Date: Fri Nov 2 13:56:11 2018 -0300
finalize wasm-based hntrie implementation
commit e7b9e043cf36ad055791713e34eb0322dec84627
Author: Raymond Hill <rhill@raymondhill.net>
Date: Fri Nov 2 08:14:02 2018 -0300
add first-pass implementation of wasm version of hntrie
commit 1015cb34624f3ef73ace58b58fe4e03dfc59897f
Author: Raymond Hill <rhill@raymondhill.net>
Date: Wed Oct 31 17:16:47 2018 -0300
back up draft work toward experimenting with wasm hntries
<https://github.com/gorhill/uBlock/issues/3436>: a new per-site switch
has been added, no-scripting, which purpose is to wholly disable/enable
javascript for a given site. This new switch has precedence over all
other ways javascript can be disabled, including precedence over dynamic
filtering rules.
The popup panel will report the number of script resources which have
been seen by uBO for the current page. There is a minor inaccuracy to
be fixed regarding the count, and which fix requires to extend request
journaling.
<https://github.com/gorhill/uBlock/issues/308>: the `noscript` tags will
now be respected when the new no-scripting switch is in effect on a given
site.
A default setting has been added to the _Settings_ pane to
disable/enable globally the new no-script switch, such that one can
work in default-deny mode regarding javascript execution.
<https://github.com/uBlockOrigin/uBlock-issues/issues/155>: a new
hidden setting, `requestJournalProcessPeriod`, has been added to
allow controlling the delay before uBO internally process it's
network request journal queue. Default to 1000 (milliseconds).
Squashed commit of the following:
commit 6a8473822537636ac54d5dabdb14472114bb730b
Author: Raymond Hill <rhill@raymondhill.net>
Date: Mon Aug 6 10:56:44 2018 -0400
remove remnant of snappyjs and spurious instruction
commit 9a4b709bee97d3cc2235fab602359fa5953bdb46
Author: Raymond Hill <rhill@raymondhill.net>
Date: Mon Aug 6 09:48:58 2018 -0400
make cache storage compression optionally available on all platforms
New advanced setting: `cacheStorageCompression`. Default is `false`.
commit 22ee6547f2f7c9c5aefe25dea1262a1b31612155
Author: Raymond Hill <rhill@raymondhill.net>
Date: Sun Aug 5 19:16:26 2018 -0400
remove Chromium from lz4 experiment
commit ee3e201c45afe983508f70713a2d43af74737d8d
Author: Raymond Hill <rhill@raymondhill.net>
Date: Sun Aug 5 18:52:43 2018 -0400
import lz4-block-codec.wasm library
commit 883a3118efcfd749c82356fde7134754d6ae371d
Author: Raymond Hill <rhill@raymondhill.net>
Date: Sun Aug 5 18:50:46 2018 -0400
implement storage compression through lz4-wasm [draft]
commit 48d1ccaba407de447c2cd6747dc3a90839c260a7
Merge: 8ae77e6 b34c897
Author: Raymond Hill <rhill@raymondhill.net>
Date: Sat Aug 4 08:56:51 2018 -0400
Merge branch 'master' of github.com:gorhill/uBlock into lz4
commit 8ae77e6aeeaa85af335e664c2560d2afd37288c6
Author: Raymond Hill <rhill@raymondhill.net>
Date: Wed Jul 25 18:17:45 2018 -0400
experiment with compression
potentially causing high-generic cosmetic filters to not be applied
because the MRU cache contains an empty list of high-generic filters
when there is a query from a content script for cosmetic filters
before they are fully loaded and ready.
- collate together specific filters with same base domain
- replace string-based hash to integer-based hash
- revisit code to benefit from ES6-specific syntax
- Default to being detached
- Default to "Current tab"
- Append current tab title to "Current tab" entry
- Avoid iterating through all tabs when no change
* Fix leftovers from old code.
* change changes.procedural.size to changes.procedural.length
changes.procedural is an array so it should be changes.procedural.length
the code works with changes.procedural.size because (undefined !== 0) is always true.
