Specifies speed mode, link mode, checksum, and frame filtering modes. More...

Macros
#define	ARM_ETH_MAC_SPEED_10M (ARM_ETH_SPEED_10M << ARM_ETH_MAC_SPEED_Pos)
	10 Mbps link speed More...

#define	ARM_ETH_MAC_SPEED_100M (ARM_ETH_SPEED_100M << ARM_ETH_MAC_SPEED_Pos)
	100 Mbps link speed More...

#define	ARM_ETH_MAC_SPEED_1G (ARM_ETH_SPEED_1G << ARM_ETH_MAC_SPEED_Pos)
	1 Gpbs link speed More...

#define	ARM_ETH_MAC_DUPLEX_HALF (ARM_ETH_DUPLEX_HALF << ARM_ETH_MAC_DUPLEX_Pos)
	Half duplex link. More...

#define	ARM_ETH_MAC_DUPLEX_FULL (ARM_ETH_DUPLEX_FULL << ARM_ETH_MAC_DUPLEX_Pos)
	Full duplex link. More...

#define	ARM_ETH_MAC_LOOPBACK (1UL << 4)
	Loop-back test mode. More...

#define	ARM_ETH_MAC_CHECKSUM_OFFLOAD_RX (1UL << 5)
	Receiver Checksum offload. More...

#define	ARM_ETH_MAC_CHECKSUM_OFFLOAD_TX (1UL << 6)
	Transmitter Checksum offload. More...

#define	ARM_ETH_MAC_ADDRESS_BROADCAST (1UL << 7)
	Accept frames with Broadcast address. More...

#define	ARM_ETH_MAC_ADDRESS_MULTICAST (1UL << 8)
	Accept frames with any Multicast address. More...

#define	ARM_ETH_MAC_ADDRESS_ALL (1UL << 9)
	Accept frames with any address (Promiscuous Mode) More...

Description

Specifies speed mode, link mode, checksum, and frame filtering modes.

The function ARM_ETH_MAC_Control with control = ARM_ETH_MAC_CONFIGURE configures the Ethernet MAC interface as specified with arg listed bellow.

Macro Definition Documentation

#define ARM_ETH_MAC_SPEED_10M (ARM_ETH_SPEED_10M << ARM_ETH_MAC_SPEED_Pos)

10 Mbps link speed

#define ARM_ETH_MAC_SPEED_100M (ARM_ETH_SPEED_100M << ARM_ETH_MAC_SPEED_Pos)

100 Mbps link speed

#define ARM_ETH_MAC_SPEED_1G (ARM_ETH_SPEED_1G << ARM_ETH_MAC_SPEED_Pos)

1 Gpbs link speed

#define ARM_ETH_MAC_DUPLEX_HALF (ARM_ETH_DUPLEX_HALF << ARM_ETH_MAC_DUPLEX_Pos)

Half duplex link.

#define ARM_ETH_MAC_DUPLEX_FULL (ARM_ETH_DUPLEX_FULL << ARM_ETH_MAC_DUPLEX_Pos)

Full duplex link.

#define ARM_ETH_MAC_LOOPBACK (1UL << 4)

Loop-back test mode.

#define ARM_ETH_MAC_CHECKSUM_OFFLOAD_RX (1UL << 5)

Receiver Checksum offload.

#define ARM_ETH_MAC_CHECKSUM_OFFLOAD_TX (1UL << 6)

Transmitter Checksum offload.

#define ARM_ETH_MAC_ADDRESS_BROADCAST (1UL << 7)

Accept frames with Broadcast address.

#define ARM_ETH_MAC_ADDRESS_MULTICAST (1UL << 8)

Accept frames with any Multicast address.

#define ARM_ETH_MAC_ADDRESS_ALL (1UL << 9)

Accept frames with any address (Promiscuous Mode)