/**
 * @page Changelog
 *
 * @tableofcontents
 * @section v2116 Version 2.1.16
 * @subsection COMMON COMMON
 * - Added:
 *     - __RAM_FUNC macro
 * 
 * @subsection ETH_MAC ETH_MAC
 * - Changed:
 *     - XMC_ETH_MAC_InitPTP(), XMC_ETH_MAC_InitPTPEx(), XMC_ETH_MAC_GetPTPTime(), XMC_ETH_MAC_UpdatePTPTime(), XMC_ETH_MAC_SetPTPAlarm(), XMC_ETH_MAC_GetRxTimeStamp(), XMC_ETH_MAC_GetTxTimeStamp()<br>
 *       Changed rollover mode of nanosecond counter from binary to digital mode, i.e 1ns resolution
 *       Fixed reference clock frequency for the time stamp update logic, i.e. use fSYS
 * - Added:
 *     - XMC_ETH_MAC_TIMESTAMP_STATUS_t enum
 *
 * @subsection RTC RTC
 * - Changed:
 *     - Changed XMC_RTC_EnableHibernationWakeUp() and XMC_RTC_DisableHibernationWakeUpcheck()<br> 
 *       Check SCU_MIRRSTS to ensure that no transfer over serial interface is pending to the RTC_CTR register
 *
 * @section v2114 Version 2.1.14
 * @subsection CCU8 CCU8
 * - Changed:
 *     - XMC_CCU8_SLICE_SetPrescaler() changed div_val parameter to type XMC_CCU8_SLICE_PRESCALER_t 
 *
 * @subsection CCU4 CCU4
 * - Changed:
 *     - XMC_CCU4_SLICE_SetPrescaler() changed div_val parameter to type XMC_CCU4_SLICE_PRESCALER_t 
 *
 * @subsection ETH_MAC ETH_MAC
 * - Fixed:
 *     - XMC_ETH_MAC_GetRxTimeStamp() and XMC_ETH_MAC_GetTxTimeStamp() fixed returned nanoseconds value
 *
 * @subsection ECAT ECAT
 * - Changed:
 *     - XMC_ECAT_ReadPhy() and XMC_ECAT_WritePhy() to release the MII access and check that the master enables take over of MII management control
 *
 * @subsection POSIF POSIF
 * - Added:
 *     - Added posif connectivity map file
 * 
 * @subsection EBU EBU
 * - Changed:
 *     - XMC_EBU_AddressSelectEnable() makes sure arbitartion mode is active
 *     - XMC_EBU_Init() adds checks for the clock acknowledgment
 *
 * @subsection SCU SCU
 * - Changed:
 *     - XMC_SCU_CLOCK_Init() ensure standby clock source is updated in the HIB domain before proceeding
 *     - XMC_SCU_CLOCK_EnableLowPowerOscillator() ensure the low power oscillator and associated watchdog is enabled before leaving the function
 *     - Documentation changes adding note on usage of XMC_SCU_GetMirrorStatus() to check if the update of HIB register contents is done
 * 
 * @section v2112 Version 2.1.12
 * @subsection ETH_MAC ETH_MAC
 * - Fixed:
 *     - XMC_ETH_MAC_InitPTP() fixed initialization
 *     - XMC_ETH_MAC_UpdatePTPTime(), XMC_ETH_MAC_SetPTPAlarm() fixed nanoseconds initialization
 *     - Ordering of PTP nanoseconds and seconds members in XMC_ETH_MAC_DMA_DESC_t structure
 * - Changed:
 *     - XMC_ETH_MAC_Init() to disable PMT and timestamp interrupt events and MMC IPC receive interrupt event
 *     - XMC_ETH_MAC_GetTxTimeStamp() and XMC_ETH_MAC_GetRxTimeStamp() return the timestamp depending on status bit in descriptor 
 * - Added:
 *     - XMC_ETH_MAC_InitPTPEx(), extension to XMC_ETH_MAC_InitPTP() adding a new parameter to set the time
 *     - XMC_ETH_MAC_SetPTPTime() to set the system time
 *     - XMC_ETH_MAC_UpdateAddend() to directly write to the addend register
 *     - XMC_ETH_MAC_EnablePTPAlarm() and XMC_ETH_MAC_DisablePTPAlarm
 * 
 * @section v2110 Version 2.1.10
 * @subsection COMMON COMMON
 * - Fixed:
 *     - Changed type of size in XMC_PRIOARRAY_t to fix compilation warnings
 *     - Fixed compilation warning in XMC_AssertHandler
 * - Changed:
 *     - Remove the need to define XMC_USER_ASSERT_FUNCTION
 *
 * @subsection ADC ADC
 * - Fixed:
 *    - Add missing support for XMC4700
 *    - Renamed XMC_CCU_41_ST2 to  XMC_CCU_41_ST3
 *    - Fix assertion in XMC_VADC_GROUP_CheckSlaveReadiness() and XMC_VADC_GROUP_IgnoreSlaveReadiness() checking the slave_group parameter 
 * - Added:
 *    - New macros equivalent to th existing ones but with better naming.
 *       @note Old macros are kept for backward compatibility but they deprecated.
 *    - ECAT support for XMC48/43
 *    - new functions to remove channels from background request source, XMC_VADC_GLOBAL_BackgroundRemoveChannelFromSequence() and XMC_VADC_GLOBAL_BackgndRemoveMultipleChannels()
 *
 * @subsection CCU4 CCU4
 * - Fixed:
 *     - XMC_CCU4_lAssertReset(), XMC_CCU4_lDeassertReset(), XMC_CCU4_lGateClock() and XMC_CCU4_lUngateClock() fix compilation warnings.
 *
 * @subsection CCU8 CCU8
 * - Fixed:
 *     - XMC_CCU8_lAssertReset(), XMC_CCU8_lDeassertReset(), XMC_CCU8_lGateClock() and XMC_CCU8_lUngateClock() fix compilation warnings.
 *
 * @subsection DMA DMA
 * - Fixed:
 *    - Fix documentation on maximum block size
 * 
 * @subsection ETH_MAC ETH_MAC
 * - Fixed:
 *    - XMC_ETH_MAC_SetPortControl() fixed compilation warning
 *    - XMC_ETH_MAC_Enable() and XMC_ETH_MAC_Disable(), fixed compilation warnings
 * - Changed:
 *    - XMC_ETH_MAC_Init() to optimize access to bus
 *
 * @subsection ERU ERU
 * - Fixed:
 *    - Remove incorrect ERU0_ETL1_INPUTB_P0_1 and replace it by ERU0_ETL1_INPUTB_SCU_HIB_SR1
 *
 * @subsection LEDTS LEDTS
 * - Fixed:
 *     - XMC_LEDTS_InitGlobal() fixed compilation warnings
 *
 * @subsection POSIF POSIF
 * - Fixed:
 *     - XMC_POSIF_Enable() and XMC_POSIF_Disable() fixed compilation warnings
 *
 * @subsection SDMMC SDMMC
 * - Added:
 *    - XMC_SDMMC_SetCardDetectionSource() and XMC_SDMMC_SetCardDetectionStatus() which are needed in case the pin SDCD (default) is not used as card detection
 *
 * @subsection USIC USIC
 * - Added:
 *    - XMC_USIC_CH_SetShiftDirection() to allow selection of shift direction of the data words for transmision and reception
 *    - XMC_USIC_CH_GetCaptureTimerValue() and XMC_USIC_CH_SetFractionalDivider()
 *
 * @section v218 Version 2.1.8
 * @subsection GENERAL GENERAL
 * - Added:
 *    - Added USBH driver
 *
 * @subsection CAN CAN
 * - Added:
 *    - XMC_CAN_IsPanelControlReady()
 * - Changed:
 *    - XMC_CAN_AllocateMOtoNodeList()
 *      Wait for ready status of list controller
 * - Fixed:
 *    - XMC_CAN_MO_Config()
 *      Solve issue with TX and RX interrupt node pointers being cleared.
 *
 * @subsection CCU4 CCU4
 * - Added:
 *    - XMC_CCU4_SLICE_StopClearTimer()
 * - Changed:
 *    - XMC_CCU4_SLICE_StopTimer(), XMC_CCU4_SLICE_ClearTimer()
 *      Avoid read write modify access
 *
 * @subsection CCU8 CCU8
 * - Added:
 *    - XMC_CCU8_SLICE_StopClearTimer()
 * - Changed:
 *    - XMC_CCU8_SLICE_StopTimer(), XMC_CCU4_SLICE_ClearTimer()
 *      Avoid read write modify access
 *
 * @subsection GPIO GPIO
 * - Added:
 *    - Added P2_0_AF_CAN_N0_TXD for XMC4300
 *
 * @subsection ECAT ECAT
 * - Added:
 *    - Macro map file added XMC_ECAT_PORT_CTRL_LATCHIN0_P9_0 and XMC_ECAT_PORT_CTRL_LATCHIN0_P9_1
 *
 * @subsection ETH_MAC ETH_MAC
 * - Added:
 *    - XMC_ETH_MAC_GetTxBuffer(), XMC_ETH_MAC_GetRxBuffer()
 *    - XMC_ETH_MAC_SetTxBufferSize()
 *    - XMC_ETH_MAC_IsRxDescriptorOwnedByDma()
 * - Changed:
 *    - XMC_ETH_MAC_ReturnTxDescriptor(), XMC_ETH_MAC_ReturnRxDescriptor()
 *      Update current descriptor pointer
 *    - XMC_ETH_MAC_Init()
 *      Disable MMC interrupt events
 *
 * @subsection I2C I2C
 * - Added:
 *    - XMC_I2C_CH_EnableDataTransmission(), XMC_I2C_CH_DisableDataTransmission()
 *
 * @subsection I2S I2S
 * - Added:
 *    - XMC_I2S_CH_EnableDataTransmission(), XMC_I2S_CH_DisableDataTransmission()
 * - Changed:
 *    - XMC_I2S_CH_Init()
 *      Change default passive level to 0
 *      Call XMC_I2S_CH_SetSystemWordLength() to set the system frame length equal to the frame length.
 *    - XMC_I2S_CH_SetBaudrate()
 *      Optional Master clock output signal generated with a fixed phase relation to SCLK
 *
 * @subsection RTC RTC
 * - Added:
 *    - XMC_RTC_SetTimeStdFormat(), XMC_RTC_SetAlarmStdFormat()
 *
 * @subsection SCU SCU
 * - Added:
 *    - XMC_SCU_CLOCK_IsLowPowerOscillatorStable(), XMC_SCU_CLOCK_IsHighPerformanceOscillatorStable()
 *    - XMC_SCU_POWER_WaitForInterrupt(), XMC_SCU_POWER_WaitForEvent()
 *    - XMC_SCU_CLOCK_EnableLowPowerOscillatorGeneralPurposeInput(), 
 *      XMC_SCU_CLOCK_DisableLowPowerOscillatorGeneralPurposeInput(),
 *      XMC_SCU_CLOCK_GetLowPowerOscillatorGeneralPurposeInputStatus()
 *    - XMC_SCU_CLOCK_EnableHighPerformanceOscillatorGeneralPurposeInput(), 
 *      XMC_SCU_CLOCK_DisableHighPerformanceOscillatorGeneralPurposeInput(),
 *      XMC_SCU_CLOCK_GetHighPerformanceOscillatorGeneralPurposeInputStatus()
 *    - XMC_SCU_HIB_IsWakeupEventDetected(), XMC_SCU_HIB_ClearWakeupEventDetectionStatus()
 *    - XMC_SCU_HIB_EnterHibernateStateEx()
 *    - Extended wakeup hibernate events using LPAC wakeup on events. Only available in XMC44, XMC42 and XMC41 series
 *    - Added LPAC APIs. Only available in XMC44, XMC42 and XMC41 series
 * - Removed:
 *    - XMC_SCU_INTERRUPT_EVENT_OSCULSTAT_UPDATED, XMC_SCU_INTERRUPT_EVENT_HDSTAT_UPDATED
 *
 * @subsection SDMMC SDMMC
 * - Fixed:
 *    - XMC_SDMMC_SetBusVoltage(), XMC_SDMMC_SetDataLineTimeout(), XMC_SDMMC_SDClockFreqSelect()
 *      Fixed wrong masking when accessing register
 *    - XMC_SDMMC_SetDataTransferMode()
 *      Avoid calling SetDateLineTimeout() 
 *
 * @subsection SPI SPI
 * - Added:
 *    - XMC_SPI_CH_EnableDataTransmission(), XMC_SPI_CH_DisableDataTransmission()
 *
 * @subsection UART UART
 * - Added:
 *    - XMC_UART_CH_EnableDataTransmission(), XMC_UART_CH_DisableDataTransmission()
 * - Changed:
 *    - XMC_UART_CH_Init()
 *      Enable transfer status BUSY
 *    - XMC_UART_CH_Stop()
 *      Check for transfer status
 *
 * @subsection USIC USIC
 * - Added: 
 *    - Add missing USIC2_C1_DX0_P4_6,USIC1_C0_DX0_P1_14, USIC2_C0_DX0_P6_5, USIC2_C0_DX0_P9_4, USIC2_C1_DX1_P9_9, USIC2_C1_DX2_P9_8  for XMC47/48 BGA196
 *    - Add missing USIC2_C1_DX0_P4_6, USIC1_C0_DX0_P1_14 for XMC47/48 LQFP100
 *    - Add missing USIC2_C1_DX0_P4_6, USIC1_C0_DX0_P1_14, USIC2_C0_DX0_P6_5 for XMC47/48 LQFP144
 *
 * @subsection VADC VADC
 * - Added:
 *    - XMC_VADC_SHS_FULL_SET_REG, XMC_VADC_RESULT_PRIORITY_AVAILABLE, XMC_VADC_SYNCTR_START_LOCATION
 *    - XMC_VADC_SHS_GAIN_LEVEL_t and XMC_VADC_SYNCTR_EVAL_t
 *    - XMC_VADC_GROUP_SetSyncSlaveReadySignal()
 *    - XMC_VADC_GROUP_ChannelGetAssertedEvents()
 *    - XMC_VADC_GROUP_GetAssertedResultEvents()
 *    - XMC_VADC_GROUP_SetResultRegPriority()
 *    - XMC_VADC_GROUP_SetSyncReadySignal()
 *    - XMC_VADC_GROUP_GetSyncReadySignal()
 *    - XMC_VADC_GROUP_GetResultRegPriority()
 * - Fixed:
 *    - XMC_VADC_GROUP_CheckSlaveReadiness(), XMC_VADC_GROUP_IgnoreSlaveReadiness()
 *      Fixed the EVAL configuration
 *
 * @section v216 Version 2.1.6
 * @subsection SCU SCU
 * - Added:
 *    - XMC_SCU_POWER_EnableMonitor(), XMC_SCU_POWER_DisableMonitor()
 *    - XMC_SCU_POWER_GetEVRStatus(), XMC_SCU_POWER_GetEVR13Voltage(), XMC_SCU_POWER_GetEVR33Voltage()
 *    - XMC_SCU_HIB_SetPinMode()
 *    - XMC_SCU_HIB_GetHibernateControlStatus()
 *    - XMC_SCU_HIB_GetEventStatus(), XMC_SCU_HIB_ClearEventStatus()
 *    - XMC_SCU_HIB_TriggerEvent(), XMC_SCU_HIB_EnableEvent(), XMC_SCU_HIB_DisableEvent()
 *    - XMC_SCU_HIB_SetWakeupTriggerInput()
 *    - XMC_SCU_HIB_SetPinMode()
 *    - XMC_SCU_HIB_SetOutputPinLevel() 
 *    - XMC_SCU_HIB_SetInput0()
 *    - XMC_SCU_HIB_EnterHibernateState()
 *
 * - Fixed:
 *    - XMC_SCU_ReadFromRetentionMemory()
 *      Fix functionality
 *    - XMC_SCU_CLOCK_ScaleMCLKFrequency()
 *      It solves issues with down clock frequency scaling *
 *    - XMC_SCU_CLOCK_Init() for XMC1400
 *      It solves issues when trying to disable the OSCHP and use the XTAL pins as GPIO
 *
 * - Changed:
 *    - XMC_SCU_INTERRUPT_ClearEventStatus()
 *      Optimization of write only registers
 *    - XMC_SCU_TRAP_Trigger(), XMC_SCU_TRAP_ClearStatus()
 *      Optimization of write only registers
 *    - XMC_SCU_RESET_AssertPeripheralReset(), XMC_SCU_RESET_DeassertPeripheralReset()
 *      Optimization of write only registers
 *    - XMC_SCU_CLOCK_GatePeripheralClock(), XMC_SCU_CLOCK_UngatePeripheralClock()
 *      Optimization of write only registers
 *    - XMC_SCU_POWER_EnableUsb(), XMC_SCU_POWER_DisableUsb()
 *      Optimization of write only registers
 *    - XMC_SCU_HIB_EnableHibernateDomain(), XMC_SCU_HIB_DisableHibernateDomain()
 *      Optimization of write only registers
 *    - XMC_SCU_RESET_ClearDeviceResetReason()
 *      Optimization of write only registers
 *
 * @subsection RTC RTC
 * - Changed:
 *    - XMC_RTC_ClearEvent()
 *      Optimization of write only registers
 *
 * @subsection SDMMC SDMMC
 * - Changed:
 *    - XMC_SDMMC_ClearEvent()
 *      Optimization of write only registers
 * - Added:
 *    - XMC_SDMMC_COMMAND_RESPONSE_t
 *
 * @subsection ETH_MAC ETH_MAC
 * - Changed:
 *    - XMC_ETH_MAC_BUF_SIZE
 *      Change XMC_ETH_MAC_BUF_SIZE to 1524 to allow for Tagged MAC frame format
 * - Fixed:
 *    - XMC_ETH_MAC_DisableEvent()
 *      Fixed functionality
 *
 * @subsection ERU ERU
 * - Added:
 *    - XMC_ERU_ETL_GetEdgeDetection()
 *
 * @subsection DMA DMA
 * - Fixed:
 *    - XMC_DMA_IRQHandler()
 *      Clear channel event status before processing the event handler.
 *      It corrects event losses if the DMA triggered in the event handler finished before returning from handler.
 *
 * - Changed:
 *    - XMC_DMA_CH_EnableEvent(), XMC_DMA_CH_DisableEvent()
 *      Optimization of write only registers
 *    - XMC_DMA_ClearOverrunStatus()
 *      Optimization of write only registers
 *
 * @subsection CCU4 CCU4
 * - Changed:
 *    - XMC_CCU4_EnableShadowTransfer()
 *      Optimization of write only registers
 *
 * @subsection CCU8 CCU8
 * - Fixed:
 *    - Use correct API implementation for XMC43, XMC47/48 devices
 * - Changed:
 *    - XMC_CCU8_EnableShadowTransfer()
 *      Optimization of write only registers
 *
 * @subsection EBU EBU
 * - Fixed:
 *    - XMC_EBU_BUS_READ_CONFIG_t:
 *      Added missing ebu_data_hold_cycles_for_read_accesses 
 *    - XMC_EBU_BUS_WRITE_CONFIG_t
 *      Added missing ebu_device_addressing_mode and ebu_data_hold_cycles_for_write_accesses 
 *
 * @subsection POSIF POSIF
 * - Changed:
 *    - XMC_POSIF_Start(), XMC_POSIF_Stop()
 *      Optimization of write only registers
 *    - XMC_POSIF_HSC_UpdateHallPattern():
 *      Optimization of write only registers
 *    - XMC_POSIF_SetEvent(), XMC_POSIF_ClearEvent()
 *      Optimization of write only registers
 *
 * @subsection USIC USIC
 * - Added:
 *    - XMC_USIC_CH_TXFIFO_PutDataHPCMode()
 * - Changed:
 *    - XMC_USIC_CH_TriggerServiceRequest()
 *      Optimization of write only registers
 *    - XMC_USIC_CH_TXFIFO_Flush(), XMC_USIC_CH_RXFIFO_Flush()
 *      Optimization of write only registers
 *    - XMC_USIC_CH_TXFIFO_ClearEvent(), XMC_USIC_CH_RXFIFO_ClearEvent()
 *      Optimization of write only registers
 *
 * @subsection SPI SPI
 * - Added:
 *    - XMC_SPI_CH_SetTransmitMode()
 *
 * @subsection VADC VADC
 * - Fixed:
 *    - XMC_VADC_GLOBAL_SHS_IsConverterReady()
 *      Fixed functionality, check SHSCFG instead of STEPCFG
 * - Changed:
 *    - XMC_VADC_GROUP_QueueClearReqSrcEvent()
 *      Optimization of write only registers
 *    - XMC_VADC_GROUP_ChannelClearEvent()
 *      Optimization of write only registers
 *
 * @subsection FLASH FLASH
 * - Fixed:
 *    - XMC_PREFETCH_EnableInstructionBuffer(), XMC_PREFETCH_DisableInstructionBuffer
 *      Fixed functionality
 *    - XMC_PREFETCH_InvalidateInstructionBuffer()
 *      Fixed functionality
 *
 * @subsection GPIO GPIO
 * - Fixed:
 *    - Map file
 *      SDMMC signals names
 *      EBU CS signal names
 * - Added:
 *    - Map file
 *      P2_0_AF_CAN_N0_TXD for XMC44xx
 *      P1_9_AF_U0C0_SCLKOUT, P4_7_AF_U2C1_DOUT0, P6_6_AF_U2C0_DOUT0 for XMC47/48 BGA196
 *
 * @section v214 Version 2.1.4
 * @subsection GENERAL GENERAL
 * - Added:
 *    - Added EtherCAT driver
 *    - Added support for XMC4300 series
 *
 * @subsection ETH_MAC ETH_MAC
 * - Fixed:
 *    - XMC_ETH_MAC_GetRxFrameSize return value in case of errors
 *
 * @subsection ETH_PHY ETH_PHY
 * - Added:
 *    - XMC_ETH_PHY_ExitPowerDown(), XMC_ETH_PHY_Reset()
 *
 * @subsection VADC VADC
 * - Fixed:
 *    - XMC_VADC_GLOBAL_TriggerEvent API fixed. OR operation removed. 
 *    - XMC_VADC_GLOBAL_ClearEvent API fixed. Multiple events triggering on clearing the event is fixed.   
 *    - Wrong MACRO name defined in xmc_vadc_map.h file corrected for XMC4200/4100 devices.
 *      XMC_VADC_G3_SAMPLE renamed to XMC_VADC_G1_SAMPLE
 *
 * @subsection FLASH FLASH
 * - Fixed:
 *    - Flash access time
 *    - Wait until operation is finished for the next functions:
 *       1. XMC_FLASH_InstallProtection
 *       2. XMC_FLASH_ConfirmProtection
 *       3. XMC_FLASH_ProgramPage
 *       4. XMC_FLASH_EraseSector
 *       5. XMC_FLASH_ErasePhysicalSector
 *       6. XMC_FLASH_EraseUCB
 *     - Fix XMC_FLASH_VerifyReadProtection and XMC_FLASH_VerifyWriteProtection
 *
 * @subsection SDMMC SDMMC
 * - Added:
 *    - XMC_SDMMC_EnableDelayCmdDatLines(), XMC_SDMMC_DisableDelayCmdDatLines(), XMC_SDMMC_SetDelay(),
 *    - XMC_SDMMC_EnableHighSpeed(), XMC_SDMMC_DisableHighSpeed()
 *
 * @subsection SPI SPI
 * - Added:
 *    - XMC_SPI_CH_EnableSlaveSelectCodedMode() and XMC_SPI_CH_DisableSlaveSelectCodedMode()
 *
 * @section v212 Version 2.1.2
 * @subsection GENERAL GENERAL
 * - Added:
 *    - Added I2S driver
 *    - Added support for XMC4700 and XMC4800 series
 *
 * @subsection DSD DSD
 * - Added:
 *    - XMC_DSD_SetResultEventFlag(), XMC_DSD_ClearResultEventFlag(), XMC_DSD_SetAlarmEventFlag() and XMC_DSD_ClearAlarmEventFlag()
 *
 * @subsection CCU4 CCU4
 * - Changed:
 *    - XMC_CCU4_EnableShadowTransfer() API is made as inline, to improve the speed
 * - Added:
 *    - XMC_CCU4_SLICE_PRESCALER_t enum is added to set the prescaler divider
 *    - XMC_CCU4_SLICE_EVENT_LEVEL_SENSITIVITY_t, two more enum items are added to support external count direction settings
 *    - XMC_CCU4_SLICE_MULTI_IRQ_ID_t is added to support the XMC_CCU4_SLICE_EnableMultipleEvents() and XMC_CCU4_SLICE_DisableMultipleEvents() APIs
 *    - Map files added macros with peripheral names for readability
 *
 * @subsection CCU8 CCU8
 * - Changed:
 *    - XMC_CCU8_EnableShadowTransfer() API is made as inline, to improve the speed
 *    - XMC_CCU8_SLICE_GetEvent() is made as inline
 * - Added:
 *    - XMC_CCU8_SLICE_PRESCALER_t enum is added to set the prescaler divider
 *    - XMC_CCU8_SLICE_SHADOW_TRANSFER_MODE_t is added for all the devices except XMC45 devices, to set when the shadow transfer has to happen
 *    - XMC_CCU8_SOURCE_OUT0_t, XMC_CCU8_SOURCE_OUT1_t, XMC_CCU8_SOURCE_OUT2_t, XMC_CCU8_SOURCE_OUT3_t enums are added to map one of the ST to OUT0, OUT1, OUT3, OUT4 signals
 *    - In XMC_CCU8_SLICE_COMPARE_CONFIG_t structure, selector_out0, selector_out1, selector_out2, selector_out3 are added to support XMC14 devices
 *    - XMC_CCU8_SLICE_EnableCascadedShadowTransfer(), XMC_CCU8_SLICE_DisableCascadedShadowTransfer(),XMC_CCU8_SLICE_SetShadowTransferMode() API are supported for all the devices except XMC45
 *    - XMC_CCU8_SLICE_EVENT_LEVEL_SENSITIVITY_t, two more enum items are added to support external count direction settings
 *    - XMC_CCU8_SLICE_SetTimerCompareMatchChannel1(), XMC_CCU8_SLICE_SetTimerCompareMatchChannel2() inline APIs are added to update the respective compare registers directly
 *    - XMC_CCU8_SLICE_MULTI_IRQ_ID_t is added to support the XMC_CCU8_SLICE_EnableMultipleEvents() and XMC_CCU8_SLICE_DisableMultipleEvents() APIs
 *    - Map files added macros with peripheral names for readability
 *
 * @subsection I2C I2C
 * - Changed:
 *    - XMC_I2C_CH_SetInputSource() API for avoiding complete DXCR register overwriting
 *    - XMC_I2C_CH_EVENT_t enum for supporting XMC_I2C_CH_EnableEvent() and XMC_I2C_CH_DisableEvent() for supporting multiple events configuration
 * - Added:
 *    - APIs for external input for BRG configuration:XMC_I2C_CH_ConfigExternalInputSignalToBRG()
 *    - APIs for enabling or disabling the ACK response to a 0x00 slave address: XMC_I2C_CH_EnableAcknowledgeAddress0() and XMC_I2C_CH_DisableAcknowledgeAddress0()
 * - Fixed: 
 *    - 10bit addressing
 *
 * @subsection SPI SPI
 * - Changed:
 *    - XMC_SPI_CH_SetInputSource() for avoiding complete DXCR register overwriting
 *    - XMC_SPI_CH_EVENT_t enum for supporting XMC_SPI_CH_EnableEvent() and XMC_SPI_CH_DisableEvent() for supporting multiple events configuration
 * - Added:
 *    - APIs for enabling/disabling delay compensation XMC_SPI_CH_DisableDelayCompensation() and XMC_SPI_CH_EnableDelayCompensation()
 *    - Added APIs for external input for BRG configuration:XMC_SPI_CH_ConfigExternalInputSignalToBRG()
 *    - API for configuring the receiving clock phase in the slave:XMC_SPI_CH_DataLatchedInTrailingEdge() and XMC_SPI_CH_DataLatchedInLeadingEdge()
 *
 * @subsection UART UART
 * - Changed:
 *    - XMC_UART_CH_SetInputSource() for avoiding complete DXCR register overwriting
 *    - XMC_UART_CH_EVENT_t enum for supporting XMC_UART_CH_EnableEvent() and XMC_UART_CH_DisableEvent() for supporting multiple events configuration
 *
 * @subsection FLASH FLASH
 * - Added:
 *    - XMC_FLASH_Reset
 *    - XMC_FLASH_ErasePhysicalSector
 *    - XMC_FLASH_EraseUCB
 *    - XMC_FLASH_ResumeProtection
 *    - XMC_FLASH_RepairPhysicalSector 
 * 
 * @subsection WDT WDT
 * - Fixed:
 *    - XMC_WDT_SetDebugMode() API, Wrong register is being configured
 *
 * @subsection VADC VADC
 * - Added:
 *    - XMC_VADC_GLOBAL_SetIndividualBoundary
 *    - XMC_VADC_GROUP_SetIndividualBoundary
 *    - XMC_VADC_GROUP_GetAlias
 *    - XMC_VADC_GROUP_GetInputClass
 *    - XMC_VADC_GROUP_ChannelSetIclass
 *    - XMC_VADC_GROUP_ChannelGetResultAlignment
 *    - XMC_VADC_GROUP_ChannelGetInputClass
 *    - XMC_VADC_GROUP_SetResultSubtractionValue
 *
 * @subsection SCU SCU
 * - Added:
 *    - XMC_SCU_CLOCK_SetDeepSleepConfig(),XMC_SCU_CLOCK_SetSleepConfig()
 *
 * @subsection CAN CAN
 * - Added:
 *    - XMC48/47 new signature for XMC_CAN_GetBaudrateClockFrequency(), XMC_CAN_Init(), XMC_CAN_SetBaudrateClockSource(), XMC_CAN_GetBaudrateClockSource() 
 *
 * @section v200 Version 2.0.0
 * @subsection GENERAL GENERAL
 * - Removed:
 *    - version macros and declaration of GetDriverVersion()
 *
 * @subsection CAN CAN
 * - Added:
 *    - XMC_CAN_NODE_ClearStatus()
 *    - XMC_CAN_MO_ReceiveData()
 *    - XMC_CAN_GATEWAY_InitDesObject()
 *    - XMC_CAN_NODE_Enable()
 * - Changed:
 *    - XMC_CAN_MO_Config(). Changed signature.
 * - Fixed:
 *    - XMC_CAN_TXFIFO_ConfigMOSlaveObject()
 *
 * @subsection CCU4 CCU4
 * - Fixed:
 *    - XMC_CCU4_SLICE_StartConfig(). Assert condition.
 *
 * @subsection CCU8 CCU8
 * - Added:
 *    - XMC_CCU8_SLICE_LoadSelector()
 * - Fixed:
 *    - XMC_CCU8_SLICE_CHECK_INTERRUPT macro. Fixed the missing item for compare match down for channel 2
 *
 * @subsection DMA DMA
 * - Added:
 *    - XMC_DMA_DisableRequestLine()
 *    - XMC_DMA_ClearRequestLine()
 *    - XMC_DMA_CH_ClearSourcePeripheralRequest()
 *    - XMC_DMA_CH_ClearDestinationPeripheralRequest()
 * - Changed:
 *    - XMC_DMA_LLI_t structure. Members src_addr and dst_addr are now uint32_t.
 *    - XMC_DMA_CH_SetSourceAddress(). Changed type of addr parameter to uint32_t
 *    - XMC_DMA_CH_SetdestinationAddress(). Changed type of addr parameter to uint32_t
 *
 * @subsection HRPWM HRPWM
 * - Added:
 *    - XMC_HRPWM_CSG_SelClampingInput()
 *    - XMC_HRPWM_SHADOW_TX_DAC_t 
 * - Fixed:
 *    - CSG trimming data assignment is corrected.
 * - Removed:
 *    - XMC_HRPWM_SHADOW_TX_t. Gets renamed to XMC_HRPWM_SHADOW_TX_DAC_t 
 *
 * @subsection I2C I2C
 * - Added:
 *    - XMC_I2C_CH_TriggerServiceRequest()
 *    - XMC_I2C_CH_SelectInterruptNodePointer()
 * - Fixed:
 *    - XMC_I2C_CH_Stop(). Check if transmission is going before setting the channel to idle.
 * 
 * @subsection LEDTS LEDTS
 * - Added: 
 *    - XMC_LEDTS_SetActivePADNo()
 * 
 * @subsection POSIF POSIF
 * - Changed:
 *    - XMC_POSIF_QD_GetDirection(). Fixed read direction
 * 
 * @subsection RTC RTC
 * - Changed:
 *    - XMC_RTC_Init(). Check RTC running condition.
 * 
 * @subsection SCU SCU
 * - Added:
 *    - For XMC11 series, XMC_SCU_SetRawTempLimits()
 *    - For XMC11 series, XMC_SCU_StartTempMeasurement()
 *    - For XMC11 series, XMC_SCU_StopTempMeasurement() 
 *    - For XMC11 series, XMC_SCU_HighTemperature() 
 *    - For XMC11 series, XMC_SCU_LowTemperature() 
 *    - For XMC11 series, XMC_SCU_GetTemperature() 
 * - Changed:
 *    - XMC_SCU_INTERRUPT_SetEventHandler(). New implementation
 *    - XMC_SCU_IRQHandler(). New implementation
 * 
 * @subsection SPI SPI
 * - Added: 
 *    - XMC_SPI_CH_SetSlaveSelectDelay()
 *    - XMC_SPI_CH_TriggerServiceRequest()
 *    - XMC_SPI_CH_SelectInterruptNodePointer()
 *    - XMC_SPI_CH_SetInterwordDelaySCLK()
 * 
 * @subsection UART UART
 * - Added:
 *    - XMC_UART_CH_TriggerServiceRequest()
 *    - XMC_UART_CH_SelectInterruptNodePointer()
 * - Fixed:
 *    - XMC_UART_CH_INPUT_t enum contents.
 *    - XMC_UART_CH_Stop(). Check if transmission is going before setting the channel to idle.
 *
 * @subsection USBD USBD
 * - Fixed:
 *    - XMC_USBD_EndpointStall(). Fix issue on USB clear stall
 *    - XMC_USBD_EndpointConfigure(). Fix issue in EP0 configuration
 *    - XMC_USBD_Disable(). Gate the clock after programming the SCU registers
 *    - XMC_USBD_IRQHandler(). Removed the DAVE_CE check on SOF event
 *  
 * @subsection VADC VADC 
 * - Added:
 *     - XMC_VADC_GLOBAL_SHS_Init()
 *     - XMC_VADC_GLOBAL_SHS_SetStepperSequence()
 *     - XMC_VADC_GLOBAL_SHS_IsConverterReady()
 *     - XMC_VADC_GLOBAL_SHS_DisableAcceleratedMode()
 *     - XMC_VADC_GLOBAL_SHS_SetGainFactor()
 *     - XMC_VADC_GLOBAL_SHS_SetMaxCalTime()
 *     - XMC_VADC_GLOBAL_SHS_EnableGainAndOffsetCalibrations()
 *     - XMC_VADC_GLOBAL_SHS_DisableGainAndOffsetCalibrations()
 *     - XMC_VADC_GLOBAL_SHS_GetOffsetCalibrationValue()
 *     - XMC_VADC_GLOBAL_SHS_SetOffsetCalibrationValue()
 *     - XMC_VADC_GLOBAL_SHS_SetSigmaDeltaLoop()
 *     - XMC_VADC_GLOBAL_SHS_EnableSigmaDeltaLoop()
 *     - XMC_VADC_GLOBAL_SHS_DisableSigmaDeltaLoop()
 *     - XMC_VADC_GROUP_SetBoundaryEventInterruptNode()
 *     - XMC_VADC_GROUP_ScanSelectTriggerEdge()
 *     - XMC_VADC_GLOBAL_BackgroundSelectTriggerEdge()
 *     - XMC_VADC_GROUP_QueueSelectTriggerEdge()
 *     - XMC_VADC_GROUP_QueueFlushEntries()
 *     - XMC_VADC_GROUP_ChannelSetBoundarySelection()
 * - Changed:
 *     - XMC_VADC_GLOBAL_GetResult(). Remove unnecessary masking, return result as 16bit.
 *     - XMC_VADC_GROUP_GetResult(). Remove unnecessary masking, return result as 16bit.
 * - Fixed:
 *     - XMC_VADC_GROUP_ExternalMuxControlInit(). 
 *     - XMC_VADC_GLOBAL_SHS_SetClockDivider(). Disable write protection of DIVS bitfield. 
 *     - XMC_VADC_GROUP_ScanSetGatingMode(). Clear current gating before applying the new requested one.
 *     - XMC_VADC_GLOBAL_BackgroundSetGatingMode(). Clear current gating before applying the new requested one.
 *     - XMC_VADC_GROUP_QueueSetGatingMode(). Clear current gating before applying the new requested one.
 * 
 * @section v100 Version 1.0.0
 * - Initial version
 */