Transfer Code to PIO

Arduino/ArduinoControl.ino

@@ -1,108 +0,0 @@
-#include <EEPROM.h>
-
-const int bjtCount = 4;
-
-const int bjtPin[bjtCount] = {6, 5, 3, 10};
-const int btnPin[bjtCount] = {7, 8, 9, 4};
-int bjtState[bjtCount] = {255, 255, 255, 255}; //255 -> bjt max "open"
-
-byte btnState[bjtCount];
-byte lastbtnState[bjtCount];
-String receivedData;
-String pendingData;
-
-void setup()
-{
-    Serial.begin(9600);
-    Serial.setTimeout(5);
-
-    for (int i = 0; i < bjtCount; i++)
-    {
-        pinMode(btnPin[i], INPUT_PULLUP);
-        pinMode(bjtPin[i], OUTPUT);
-        bjtState[i] = EEPROM.read(i);
-        digitalWrite(bjtPin[i], bjtState[i]);
-    }
-}
-
-void toggleLED(int i)
-{
-    if (bjtState[i] != 0)
-    {
-        bjtState[i] = 0;
-    }
-    else
-    {
-        bjtState[i] = 255;
-    }
-}
-
-void absoluteLED(String data, int i)
-{
-    if (data == "off")
-    {
-        bjtState[i] = 0;
-    }
-
-    if (data == "on")
-    {
-        bjtState[i] = 255;
-    }
-}
-
-void loop()
-{
-    while (Serial.available())
-    {
-        receivedData = Serial.readString(); //FORMAT: index of light + t oggle, i ncrease, d ecrease -> eg. 0t
-        Serial.flush();
-    }
-
-    for (int i = 0; i < bjtCount; i++)
-    {
-        btnState[i] = digitalRead(btnPin[i]);
-
-        if ((btnState[i] == LOW && btnState[i] != lastbtnState[i]))
-        {
-            toggleLED(i);
-        }
-
-        if (receivedData.indexOf(String(i)) == 0 && receivedData.length() == 2)
-        {
-            if (receivedData.indexOf("t") >= 0)
-            {
-                toggleLED(i);
-            }
-            else if (receivedData.indexOf("i") >= 0)
-            {
-                bjtState[i] += 5;
-            }
-            else if (receivedData.indexOf("d") >= 0)
-            {
-                bjtState[i] -= 5;
-            }
-        }
-
-        absoluteLED(receivedData, i);
-
-        //clamp state between 0 and 255
-        if (bjtState[i] > 255)
-        {
-            bjtState[i] = 255;
-        }
-
-        if (bjtState[i] < 0)
-        {
-            bjtState[i] = 0;
-        }
-
-        analogWrite(bjtPin[i], bjtState[i]);
-        EEPROM.update(i, bjtState[i]);
-        lastbtnState[i] = btnState[i];
-        pendingData += String(bjtState[i]) + ",";
-    }
-
-    Serial.println(pendingData);
-    pendingData = "";
-    receivedData = "";
-}

Arduino/Control/.gitignore

@@ -0,0 +1,5 @@
+.pio
+.vscode/.browse.c_cpp.db*
+.vscode/c_cpp_properties.json
+.vscode/launch.json
+.vscode/ipch

Arduino/Control/.vscode/extensions.json

@@ -0,0 +1,7 @@
+{
+    // See http://go.microsoft.com/fwlink/?LinkId=827846
+    // for the documentation about the extensions.json format
+    "recommendations": [
+        "platformio.platformio-ide"
+    ]
+}

Arduino/Control/include/README

@@ -0,0 +1,39 @@
+
+This directory is intended for project header files.
+
+A header file is a file containing C declarations and macro definitions
+to be shared between several project source files. You request the use of a
+header file in your project source file (C, C++, etc) located in `src` folder
+by including it, with the C preprocessing directive `#include'.
+
+```src/main.c
+
+#include "header.h"
+
+int main (void)
+{
+ ...
+}
+```
+
+Including a header file produces the same results as copying the header file
+into each source file that needs it. Such copying would be time-consuming
+and error-prone. With a header file, the related declarations appear
+in only one place. If they need to be changed, they can be changed in one
+place, and programs that include the header file will automatically use the
+new version when next recompiled. The header file eliminates the labor of
+finding and changing all the copies as well as the risk that a failure to
+find one copy will result in inconsistencies within a program.
+
+In C, the usual convention is to give header files names that end with `.h'.
+It is most portable to use only letters, digits, dashes, and underscores in
+header file names, and at most one dot.
+
+Read more about using header files in official GCC documentation:
+
+* Include Syntax
+* Include Operation
+* Once-Only Headers
+* Computed Includes
+
+https://gcc.gnu.org/onlinedocs/cpp/Header-Files.html

Arduino/Control/lib/README

@@ -0,0 +1,46 @@
+
+This directory is intended for project specific (private) libraries.
+PlatformIO will compile them to static libraries and link into executable file.
+
+The source code of each library should be placed in a an own separate directory
+("lib/your_library_name/[here are source files]").
+
+For example, see a structure of the following two libraries `Foo` and `Bar`:
+
+|--lib
+|  |
+|  |--Bar
+|  |  |--docs
+|  |  |--examples
+|  |  |--src
+|  |     |- Bar.c
+|  |     |- Bar.h
+|  |  |- library.json (optional, custom build options, etc) https://docs.platformio.org/page/librarymanager/config.html
+|  |
+|  |--Foo
+|  |  |- Foo.c
+|  |  |- Foo.h
+|  |
+|  |- README --> THIS FILE
+|
+|- platformio.ini
+|--src
+   |- main.c
+
+and a contents of `src/main.c`:
+```
+#include <Foo.h>
+#include <Bar.h>
+
+int main (void)
+{
+  ...
+}
+
+```
+
+PlatformIO Library Dependency Finder will find automatically dependent
+libraries scanning project source files.
+
+More information about PlatformIO Library Dependency Finder
+- https://docs.platformio.org/page/librarymanager/ldf.html

Arduino/Control/platformio.ini

@@ -0,0 +1,16 @@
+; PlatformIO Project Configuration File
+;
+;   Build options: build flags, source filter
+;   Upload options: custom upload port, speed and extra flags
+;   Library options: dependencies, extra library storages
+;   Advanced options: extra scripting
+;
+; Please visit documentation for the other options and examples
+; https://docs.platformio.org/page/projectconf.html
+
+[env:control]
+platform = atmelavr
+board = nanoatmega328
+framework = arduino
+upload_port = COM6
+monitor_port = COM6

Arduino/Control/src/main.cpp

@@ -0,0 +1,109 @@
+#include <Arduino.h>
+#include <EEPROM.h>
+
+const int bjtCount = 4;
+
+const int bjtPin[bjtCount] = {6, 5, 3, 10};
+const int btnPin[bjtCount] = {7, 8, 9, 4};
+int bjtState[bjtCount] = {255, 255, 255, 255}; //255 -> bjt max "open"
+
+byte btnState[bjtCount];
+byte lastbtnState[bjtCount];
+String receivedData;
+String pendingData;
+
+void setup()
+{
+  Serial.begin(9600);
+  Serial.setTimeout(5);
+
+  for (int i = 0; i < bjtCount; i++)
+  {
+    pinMode(btnPin[i], INPUT_PULLUP);
+    pinMode(bjtPin[i], OUTPUT);
+    bjtState[i] = EEPROM.read(i);
+    digitalWrite(bjtPin[i], bjtState[i]);
+  }
+}
+
+void toggleLED(int i)
+{
+  if (bjtState[i] != 0)
+  {
+    bjtState[i] = 0;
+  }
+  else
+  {
+    bjtState[i] = 255;
+  }
+}
+
+void absoluteLED(String data, int i)
+{
+  if (data == "off")
+  {
+    bjtState[i] = 0;
+  }
+
+  if (data == "on")
+  {
+    bjtState[i] = 255;
+  }
+}
+
+void loop()
+{
+  while (Serial.available())
+  {
+    receivedData = Serial.readString(); //FORMAT: index of light + t oggle, i ncrease, d ecrease -> eg. 0t
+    Serial.flush();
+  }
+
+  for (int i = 0; i < bjtCount; i++)
+  {
+    btnState[i] = digitalRead(btnPin[i]);
+
+    if ((btnState[i] == LOW && btnState[i] != lastbtnState[i]))
+    {
+      toggleLED(i);
+    }
+
+    if (receivedData.indexOf(String(i)) == 0 && receivedData.length() == 2)
+    {
+      if (receivedData.indexOf("t") >= 0)
+      {
+        toggleLED(i);
+      }
+      else if (receivedData.indexOf("i") >= 0)
+      {
+        bjtState[i] += 5;
+      }
+      else if (receivedData.indexOf("d") >= 0)
+      {
+        bjtState[i] -= 5;
+      }
+    }
+
+    absoluteLED(receivedData, i);
+
+    //clamp state between 0 and 255
+    if (bjtState[i] > 255)
+    {
+      bjtState[i] = 255;
+    }
+
+    if (bjtState[i] < 0)
+    {
+      bjtState[i] = 0;
+    }
+
+    analogWrite(bjtPin[i], bjtState[i]);
+    EEPROM.update(i, bjtState[i]);
+    lastbtnState[i] = btnState[i];
+    pendingData += String(bjtState[i]) + ",";
+  }
+
+  Serial.println(pendingData);
+  pendingData = "";
+  receivedData = "";
+}

Arduino/Control/test/README

@@ -0,0 +1,11 @@
+
+This directory is intended for PlatformIO Unit Testing and project tests.
+
+Unit Testing is a software testing method by which individual units of
+source code, sets of one or more MCU program modules together with associated
+control data, usage procedures, and operating procedures, are tested to
+determine whether they are fit for use. Unit testing finds problems early
+in the development cycle.
+
+More information about PlatformIO Unit Testing:
+- https://docs.platformio.org/page/plus/unit-testing.html