CMSIS-Driver  Version 2.05
Peripheral Interface for Middleware and Application Code
 All Data Structures Files Functions Variables Typedefs Enumerations Enumerator Macros Groups Pages
Macros
SAI Controls
SAI Control Codes

Specifies controls. More...

Macros

#define ARM_SAI_CONFIGURE_TX   (0x01U)
 Configure Transmitter; arg1 and arg2 provide additional configuration. More...
 
#define ARM_SAI_CONFIGURE_RX   (0x02U)
 Configure Receiver; arg1 and arg2 provide additional configuration. More...
 
#define ARM_SAI_CONTROL_TX   (0x03U)
 Control Transmitter; arg1.0: 0=disable (default), 1=enable; arg1.1: mute. More...
 
#define ARM_SAI_CONTROL_RX   (0x04U)
 Control Receiver; arg1.0: 0=disable (default), 1=enable. More...
 
#define ARM_SAI_MASK_SLOTS_TX   (0x05U)
 Mask Transmitter slots; arg1 = mask (bit: 0=active, 1=inactive); all configured slots are active by default. More...
 
#define ARM_SAI_MASK_SLOTS_RX   (0x06U)
 Mask Receiver slots; arg1 = mask (bit: 0=active, 1=inactive); all configured slots are active by default. More...
 
#define ARM_SAI_ABORT_SEND   (0x07U)
 Abort ARM_SAI_Send. More...
 
#define ARM_SAI_ABORT_RECEIVE   (0x08U)
 Abort ARM_SAI_Receive. More...
 

Description

Specifies controls.

Macro Definition Documentation

#define ARM_SAI_CONFIGURE_TX   (0x01U)

Configure Transmitter; arg1 and arg2 provide additional configuration.

See Also
ARM_SAI_Control
#define ARM_SAI_CONFIGURE_RX   (0x02U)

Configure Receiver; arg1 and arg2 provide additional configuration.

See Also
ARM_SAI_Control
#define ARM_SAI_CONTROL_TX   (0x03U)

Control Transmitter; arg1.0: 0=disable (default), 1=enable; arg1.1: mute.

See Also
ARM_SAI_Control; ARM_SAI_Send
#define ARM_SAI_CONTROL_RX   (0x04U)

Control Receiver; arg1.0: 0=disable (default), 1=enable.

See Also
ARM_SAI_Control; ARM_SAI_Receive
#define ARM_SAI_MASK_SLOTS_TX   (0x05U)

Mask Transmitter slots; arg1 = mask (bit: 0=active, 1=inactive); all configured slots are active by default.

See Also
ARM_SAI_Control; ARM_SAI_Send
#define ARM_SAI_MASK_SLOTS_RX   (0x06U)

Mask Receiver slots; arg1 = mask (bit: 0=active, 1=inactive); all configured slots are active by default.

See Also
ARM_SAI_Control; ARM_SAI_Receive
#define ARM_SAI_ABORT_SEND   (0x07U)

Abort ARM_SAI_Send.

See Also
ARM_SAI_Control; ARM_SAI_Send
#define ARM_SAI_ABORT_RECEIVE   (0x08U)

Abort ARM_SAI_Receive.

See Also
ARM_SAI_Control; ARM_SAI_Receive