Blank Check

The following functions are available for creating new Flash programming algorithms:

Function Name	Indication	Description
BlankCheck	optional	Check and compare patterns.
EraseChip	optional	Delete entire Flash memory content.
EraseSector	mandatory	Delete Flash memory content of a specific sector.
Init	mandatory	Initialize and prepare device for Flash programming.
ProgramPage	mandatory	Write the application into the Flash memory.
UnInit	mandatory	De-initialize the microcontroller after one of the Flash programming steps.
Verify	optional	Compare Flash memory content with the program code.

BlankCheck

int BlankCheck (unsigned long adr, unsigned long sz, unsigned char pat);

Parameters

adr	Block start address
sz	Block size in bytes
pat	Pattern to compare

Returns

status information:

0 when the block content is equal to the pattern pat.
1 when the block content differs from the pattern pat.

The function BlankCheck can be used to check whether the specified block is empty, or whether the content is equal to a specific pattern defined in the argument pat.

The argument adr specifies the start address of the block that is to be verified.

The argument sz specifies the size of the block that is to be verified.

Code Example

int BlankCheck (unsigned long adr, unsigned long sz, unsigned char pat) {
 
  unsigned long i, j, k;
 
  // Recalculate address for External SDRAM addresses
  if (adr >= SDRAM_START)
    adr = adr - SDRAM_START + USER_OFFSET;
 
  for (i = 0; i < sz; i += 256) {
    // Read 256 bytes
    ReadPage_HW (adr+i, 256, &rd_buf[0]);
 
    // Determine size to compare
    if ((sz-i) >= 256) k = 256;
    else               k = (sz-i);
 
    // Check up to 256 bytes if equal to pattern "pat"
    for (j = 0; j < k; j++)
      if (rd_buf[j] != pat) return (1); // Memory is not blank
  }
 
  return (0);                           // Memory is blank
}

EraseChip

int EraseChip (void);

Returns

status information:

0 on success.
1 on failure.

The function EraseChip deletes the content of the entire Flash memory. It is invoked whenever the uVision menu Flash - Erase is used, or whenever an attempt is made to download the program to Flash and the option Erase Full Chip has been set in the Flash Download Setup dialog. If this function is missing in the Flash Programming Algorithm, the EraseSector function is executed until the entire content of the Flash memory area has been deleted.

Code Example

int EraseChip (void) {
 
  FLASH->CR |=  FLASH_MER;                      // Mass Erase Enabled
  FLASH->CR |=  FLASH_STRT;                     // Start Erase
 
  while (FLASH->SR & FLASH_BSY) {
    IWDG->KR = 0xAAAA;                          // Reload IWDG
  }
 
  FLASH->CR &= ~FLASH_MER;                      // Mass Erase Disabled
 
  return (0);                                   // Done
}

EraseSector

int EraseSector (unsigned long adr);

Parameters

adr	Sector address

Returns

status information:

0 on success.
1 on failure.

The function EraseSector deletes the content of the sector starting at the address specified by the argument adr. The function is invoked whenever the uVision menu Flash - Erase is used, or whenever an attempt is made to download the program to Flash and the option Erase Sectors has been set in the Flash Download Setup dialog.

Code Example

int EraseSector (unsigned long adr) {
 
  FLASH->CR |=  FLASH_PER;                      // Page Erase Enabled
  FLASH->AR  =  adr;                            // Page Address
  FLASH->CR |=  FLASH_STRT;                     // Start Erase
 
  while (FLASH->SR & FLASH_BSY) {
    IWDG->KR = 0xAAAA;                          // Reload IWDG
  }
 
  FLASH->CR &= ~FLASH_PER;                      // Page Erase Disabled
 
  return (0);                                   // Done
}

Init

int Init (unsigned long adr, unsigned long clk, unsigned long fnc);

Parameters

adr	Device base address
clk	Clock frequency (Hz)
fnc	Function code

Returns

status information:

0 on success.
1 on failure.

The function Init initializes the microcontroller for Flash programming. It is invoked whenever an attempt is made to download the program to Flash.

The argument adr specifies the base address of the device.

The argument clk specifies the clock frequency for prgramming the device.

The argument fnc is a number:

1 stands for Erase.
2 stands for Program.
3 stands for Verify.

Thus, different initialization sections can be implemented for each individual Flash programming step.

Code Example

int Init (unsigned long adr, unsigned long clk, unsigned long fnc) {
 
  // Zero Wait State
  FLASH->ACR  = 0x00000000;
 
  // Unlock Flash
  FLASH->KEYR = FLASH_KEY1;
  FLASH->KEYR = FLASH_KEY2;
 
  // Test if IWDG is running (IWDG in HW mode)
  if ((FLASH->OBR & 0x04) == 0x00) {
    // Set IWDG time out to ~32.768 second
    IWDG->KR  = 0x5555; // Enable write access to IWDG_PR and IWDG_RLR
    IWDG->PR  = 0x06;   // Set prescaler to 256
    IWDG->RLR = 4095;   // Set reload value to 4095
  }
 
  return (0);
}

ProgramPage

int ProgramPage (unsigned long adr, unsigned long sz, unsigned char *buf);

Parameters

adr	Page start address
sz	Page size
buf	Data to be written

Returns

status information:

0 on success.
1 on failure.

The function ProgramPage is used to write code into the Flash memory. It is invoked whenever an attempt is made to download a program to Flash.

The argument adr specifies the start address of the page that is to be programmed.

The argument sz specifies the size of the page that is to be programmed.

The argument buf points to the buffer containing the data to be programmed.

Code Example

int ProgramPage (unsigned long adr, unsigned long sz, unsigned char *buf) {
 
  sz = (sz + 1) & ~1;                           // Adjust size for Half Words
 
  while (sz) {
 
    FLASH->CR |=  FLASH_PG;                     // Programming Enabled
 
    M16(adr) = *((unsigned short *)buf);        // Program Half Word
    while (FLASH->SR & FLASH_BSY);
 
    FLASH->CR &= ~FLASH_PG;                     // Programming Disabled
 
    // Check for Errors
    if (FLASH->SR & (FLASH_PGERR | FLASH_WRPRTERR)) {
      FLASH->SR |= FLASH_PGERR | FLASH_WRPRTERR;
      return (1);                               // Failed
    }
 
    // Go to next Half Word
    adr += 2;
    buf += 2;
    sz  -= 2;
 
  }
 
  return (0);                                   // Done
}

UnInit

int UnInit (unsigned long fnc);

Parameters

fnc	Function code

Returns

status information:

0 on success.
1 on failure.

The function UnInit de-initializes the microcontroller and is invoked at the end of an erasing, programming, or verifying step.

The argument fnc is a number:

1 stands for Erase.
2 stands for Program.
3 stands for Verify.

Thus, different de-initialization sections can be implemented for each individual Flash programming step.

Code Example

int UnInit (unsigned long fnc) {
 
  // Lock Flash
  FLASH->CR |=  FLASH_LOCK;
 
  return (0);
}

Verify

unsigned long Verify (unsigned long adr, unsigned long sz, unsigned char *buf);

Parameters

adr	Start address
sz	Size in bytes
buf	Data to be compared

Returns

status information:

the sum of (adr+sz) - on success.
any other number - on failure, and represents the failing address.

The function Verify compares the content of the Flash memory with the program code *buf.

The argument adr specifies the start address for the verification.

The argument sz specifies the size of the verification.

The argument buf points to the buffer containing the data to be verified.

Code Example

unsigned long Verify (unsigned long adr, unsigned long sz, unsigned char *buf) {
  unsigned long i, adr_dest, in_page_ofs;
 
  if (adr < block_size) {               // Verifying 2-nd level bootloader data
    adr_dest = adr + page_usr_size;     // skip page 0 of block 0
  } else {                              // Verifying program data
    FindBlock(adr, 0);
    adr_dest  = nand_block_offset + (adr & (block_size-1));
  }
  in_page_ofs = adr_dest & (page_usr_size-1);
 
  if (ReadPage_HW(adr_dest, page_usr_size, data_buf)) return (1);
  for (i=0; i<sz; i++)
    if (buf[i] != data_buf[i+in_page_ofs])
      break;
 
  return (adr+i);
}